Dyson Humidifier Cleaning – 8 Easy Steps

The new Dyson humidifier is a pretty great thing to have in your home. If you live in a really dry climate, or if it is winter and all of the heating is drying out the air, having a humidifier comes in handy. If the air you are living in is too dry, it can cause some serious problems for you. Dry skin, cracked lips, and breathing issues are just some of the problems which can occur due to dry air.

However, the Dyson humidifier is a great option to have if you need to moisten the air in your home. It can go a long way in relieving respiratory issues, and make sure your skin is not so dry. With that being said, although the Dyson humidifier does work quite well, there seem to be a number of complaints about it.

These complaints are centered around the fact that it needs to be cleaned a lot. As appears to be the case, this Dyson humidifier needs to be cleaned very often, and if it is not cleaned properly, it can cause some problems. Let’s take a closer look at the Dyson humidifier, customer complaints, the problems it has, and why it needs to be cleaned often. Let’s get right to it and help you keep your Dyson humidifier in top condition.

How To Clean Your Dyson Humidifier

The main problem which most people seem to be having with the Dyson humidifier is that it gets dirty really fast. Even worse, all of the dirt, mold, and grime that can accumulate on it and within the components causes it to break down and lose efficacy. This can also cause it to distribute mold and dirt along with the moist air, which can cause its own problems.

As the case seems to be, these things need to be cleaned at least once per month. This is one of the big complaints which people have about it – that it needs to be cleaned more frequently than other humidifiers. To make life a little easier for you, you can follow this step-by-step tutorial on how to clean your Dyson humidifier.

Keep in mind that you will have to clean it once per month, or even more frequently, depending on how much you use it, which is an obvious pain in the neck. However, if you want to keep it in working condition, and to make sure that it doesn’t distribute dirty air, you will need to maintain a rigorous cleaning schedule.

Dyson Humidifier Cleaning Step by Step 

Here is a simple step by step instructional on how to keep your Dyson humidifier clean.

  1. The first thing that you need to do is to remove the tank. Make sure to wipe away any excess or remaining water from the bottom of the tank. Now, unscrew the plug for the water tank and empty out all remaining water from the water tank.
  2. Now you need to remove the chimney from the water tank. You can do this by twisting the chimney dial 90 degrees clockwise in order to loosen it, then you can lift out the chimney. Now you need to remove the seal. Pinch the tabs together with one hand and just lift it straight out.
  3. Now you also need to drain the water from the water trough by first removing the seal on the water trough.
  4. In order to clean the Dyson humidifier, make a citric acid solution, which is done by mixing 30 grams of powdered citric acid with 1 liter of water. Make sure that it is mixed well. Take this solution and fill the water trough with it until the piezo and the UV-C emitter are fully covered. You then want to put the water chimney, seal, and trough seal in the remaining solution which you have not yet used. Wait about 15 minutes before removing these parts from the solution.
  5. Empty the water trough of the solution which you have filled it with. After doing so, rinse all of the parts under running cold water. Then, take a dry and soft cloth to thoroughly dry all of the cleaned parts.
  6. Now it is time to remove the surround from the amp assembly. Just pull the bottom outwards and lift it up. Use a cloth soaked in the same citric acid solution, ring it out a bit, and then wipe down the edges of the amp and the upper assembly. Do the same for the amp assembly surround.
  7. Now, pour the remaining solution into the water tank. Replace the water tank plug so the citric acid solution cannot leak out, and then shake it for about 30 seconds to loosen, dissolve particles, and clean the inside of the tank. Leave the tank upright with the solution inside and let it sit for 15 minutes.
  8. Empty the water tank of the citric acid solution and then fill it half way with cold water. Shake it around for 30 seconds, and then drain the cold water. Now you can reassemble the Dyson humidifier in the same way it was taken apart.

Dyson Humidifier Cleaning Videos

Dyson have made two great videos for both weekly and monthly cleaning of their humidifier so we've included it them here for completeness. If you're not clear on any of the above steps check out the video so you can see up close what to do.

Dyson Humidifier Weekly Cleaning

Dyson Humidifier Monthly Cleaning

Cleaning Your Dyson Humidifier – Conclusion 

For many people out there, humidifiers are essential machines needed to humidify the air. They are beneficial for people with respiratory issues and for dry and cracked skin. Many people cannot live without these awesome things. Dyson has made a humidifier that works really well, and it performs its duties without issue.

However, as we have noted, it does get really dirty quite fast, which is of course a problem. The dirt which builds up can cause it to break down and to distribute dirty air into your home. One of the main complaints is that it needs to be cleaned way too frequently. As you can see from above, it does take quite a bit of effort to clean, and it needs to be done on a monthly basis.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: